WengYang Industrial Zone Yueqing Wenzhou 325000
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Long SPD connecting leads raise the voltage seen by equipment during a surge. Learn how to measure the full path, shorten wiring, and review coordinated protection.
Which RCD type does a heat pump need? Compare Type A, F and B for inverter-driven units, then check the manual, fault current and local rules before ordering.
Where should surge protection go in a VFD installation? Compare the AC supply, PWM motor output and control circuits, then use a practical SPD selection checklist.
Learn how to plan surge protection for LED street lights, including feeder, pole and luminaire SPD placement, selection, bonding and maintenance.
SPD vs voltage stabilizer: learn the difference between transient surge protection and voltage regulation, and what to check before specifying equipment.
Compare 1P+N and 2P RCBOs: neutral switching, protected poles, ratings and a practical buyer checklist. Learn why the exact datasheet matters.
GFCI vs RCD: both detect current imbalance, but ratings, standards and device formats differ. Compare UL 943 GFCIs with IEC RCCBs and RCBOs before specifying.
Whole-house SPD or plug-in surge protector? Compare what each protects, when to use both, and what to check before choosing an AC SPD.
MOV vs GDT is an important comparison when evaluating surge protective devices. A metal oxide varistor limits voltage through a nonlinear resistance characteristic. A gas discharge tube switches into a conducting state when the gas inside ionizes. Both can form…
SPD joules vs kA is a common source of confusion when comparing surge protectors. A plug-in surge strip may advertise thousands of joules, while a panel-mounted surge protective device lists tens of kiloamperes. Those numbers describe different quantities and cannot…