Zona industrial de WengYang Yueqing Wenzhou 325000
Horas de trabajo
De lunes a viernes: de 7.00 a 19.00 horas
Fin de semana: 10.00 A 17.00 HORAS
Interruptor de transferencia automática modular para riel DIN G2R-63 de 6A a 63A
$14.93
Compact 2P/4P DIN rail automatic transfer switch for 6A–63A AC systems. Provides rapid automatic or manual changeover between normal and standby power, with clear status indication and voltage protection.
G2R-63 DIN Rail Modular Automatic Transfer Switch provides reliable automatic changeover between a normal power source and a standby source. Designed for low-voltage AC systems, it helps maintain power continuity for residential, commercial, industrial and solar backup applications.
Características principales
- Fast automatic transfer in less than 50 ms
- Rated current options from 6A to 63A
- 2P and 4P configurations for single-phase and three-phase systems
- Automatic and manual operating modes
- Over-voltage and under-voltage protection
- DIN rail modular design for compact installation
- Clear source and load status indication
G2R-63 Connection & Component Guide
Pure technical line drawing — select a callout to view its function.
Interactive component guide
Select a label or connection line to display its function.
DIN Rail Mounting Diagram
Reference Dimensions
Overall width: 94 mmOverall height: 78 mmBody height: 70 mmRail opening: 35 mmTerminal span: 45 mmReference torque: 2,5 N-m
Verify dimensions and tightening requirements for the ordered configuration.
Technical Parameters
| Modelo | G2R-63 |
|---|---|
| Tipo de producto | PC-class automatic transfer switch |
| Corriente nominal de funcionamiento | 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A |
| Tensión nominal de funcionamiento | AC 110V / AC 220V |
| Frecuencia | 50/60 Hz |
| Postes | 2P / 4P |
| Tensión nominal de aislamiento | 690V |
| Tensión soportada de impulso nominal | 8kV |
| Tiempo de transferencia | <50 ms |
| Vida mecánica | ≥8,000 operations |
| Vida eléctrica | ≥1,500 operations |
| Montaje | Carril DIN |
Cómo funciona
When the normal power source fails or moves outside the permitted voltage range, the G2R-63 automatically transfers the load to the standby power source. When normal power is restored, the switch returns the load according to its operating logic. A manual mode is also available for commissioning and maintenance.
Aplicaciones
- Solar and generator backup systems
- Cuadros de distribución residenciales
- Commercial buildings and offices
- Data, communication and monitoring equipment
- Industrial control and critical auxiliary circuits
Ordering Information
Select the required rated current, operating voltage and pole configuration when requesting a quotation. Contact KUANGYA for OEM labeling, packaging and project support.
PREGUNTAS FRECUENTES
¿Cuál es la diferencia entre las versiones 2P y 4P?
La versión 2P se utiliza normalmente en sistemas monofásicos, mientras que la versión 4P está diseñada para sistemas trifásicos que requieren conmutación del neutro.
¿Puede el interruptor operarse manualmente?
Sí. El selector frontal admite funcionamiento automático y manual.
¿Es adecuado para sistemas de respaldo solar?
Sí. Puede transferir una carga entre la energía eléctrica normal y una fuente de reserva compatible, como un generador o un suministro de respaldo solar.
