RCCB VKL001 - автоматический выключатель остаточного тока

Обзор

The VKL001 однофазное устройство rccb (also available for three-phase boards as 4P) detects earth-leakage
currents and trips before harm occurs, providing protection for people and installations. It is widely applied in
housing, the tertiary sector, and industry. Selection covers rated currents from 16 A to 100 A and residual
sensitivities from 10 mA to 300 mA.

Detection classes & selection

• AC class — trips for slowly increasing sinusoidal AC residual currents, whether applied slowly or suddenly.
• A class — all AC features plus tripping for pulsating DC residual currents, whether applied suddenly or increasing slowly.
• High-immunity variants (Si/G/KV) — filters against spurious tripping caused by harmonics and transient surges; stable under 8/20 μs surge of 3000 A (per datasheet note).

Tripping sensitivity & time

• 10 mA — precision instrument leakage protection and bathroom use (available on 2P/4P 16–40 A).
• 30 мА — additional protection against direct contact.
• 100 мА — coordinated with the earthing system for indirect contact protection.
• 300 мА — protection against indirect contacts and fire hazards.

• Instantaneous — tripping without intentional delay; break time under IΔn (Normal) ≤ 100 ms.
• Short time delay (Si, G, KV) — ensures any tripping at least 10 ms (10–300 ms range).
• Selective (S) — 150–500 ms, ensures discrimination with a downstream non-selective RCD.

Key features

• Configurations: 2P / 4P; top or bottom supply; any mounting position.
• Rated current In: 16, 25, 32, 40, 63, 80, 100 A.
• Rated sensitivity IΔn: 10 mA (2P/4P 16–40 A), 30 mA, 100 mA, 300 mA.
• Rated voltage Ue: 2P: 240 V~; 4P: 415 V~. Ui: 500 V. Frequency: 50/60 Hz.
• Residual making & breaking (IΔm): 500 A (In 16–40 A); 630 A (63 A); 800 A (80 A); 1000 A (100 A).
• Conditional short-circuit (Inc = IΔc): 6000 A or 10000 A (with upstream SCPD coordination).
• Impulse withstand (Uimp): 6 kV; Dielectric test: 2.5 kV (1 min at power frequency).
• Endurance: ≥ 20,000 mechanical operations / ≥ 2000 electrical operations.
• Terminal protection degree: IP20; Fault current indicator: Yes.
• Ambient: −25 °C … +55 °C (daily avg ≤ 35 °C); Storage: −40 °C … +70 °C.
• Terminals: cable / pin-type busbar; sizes (cable): 25–35 mm²; 18–3 / 18–2 AWG; sizes (busbar): 10/16 mm²; 18–8 / 18–5 AWG.
• Tightening torque: 2.5 N·m (≈ 22 in-lbs).
• Крепление: DIN rail EN 60715 (35 mm), fast clip device; connection from top and bottom.
• Standards & approvals: IEC/EN 61008-1; SEMKO, UKCA, CE.

Technical Data (full table)

Приложения

• Single-phase boards requiring an однофазное устройство rccb device at 240 V~ (2P).
• Three-phase distribution at 415 V~ (4P) with coordination for 6/10 kA conditional short-circuit.
• Loads with electronics and frequent transients — use high-immunity variants (Si/G/KV) to reduce nuisance trips.