2+3形サージ防護デバイス1P KYSPD-20T2+3-1P|Kuangya

  • Type 2+3 surge protection device 1P for single-phase AC systems at 230 V.

  • サージ定格: 10kA時 (8/20 µs), 最大20 kA(8/20 µs), アップ≤ 0.3-1.8 kV Ucに依存する。.

  • Compact pluggable DIN-rail module, thermal disconnector with status indicator, オプションのRC信号接点.

お見積もり

カテゴリー:
The Kuangya KYSPD-20T2+3-1P is a compact type 2+3 surge protection device 1P
designed for single-phase electrical panels at 230 V AC. It combines Type 2 and Type 3 protection
classes, making it suitable for downstream circuits where sensitive equipment requires enhanced
surge suppression.This SPD features MOV-based surge absorption with a pluggable cartridge design,
integrated thermal disconnector, and clear green/red status indicator. Optional RC contacts
allow remote fault signaling for integration with building management systems or control panels.

主な特徴

  • Class II+III / Type 2+3 surge protective device (1P).
  • 公称放電電流 (In):10 kA (8/20 μs)。.
  • 最大放電電流 (Imax):20 kA(8/20 μs)。.
  • 電圧保護レベル (Up): Uc (75-440 V) に応じて≤ 0.3-1.8 kV。.
  • 信頼性の高い過渡抑制のための高速応答時間<25 ns。
  • バックアップヒューズ:最大63 A gL/gG; ISCCR 10 kA AC。.
  • オプションのRC信号接点:AC 250 V / 0.5 A; DC 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A。.
  • Thermoplastic UL94 V-0 housing, IP20; operating temperature -40 °C to +70 °C.
  • DINレール取付(35 mm、EN 60715)、IEC/EN 61643-11準拠。.

仕様

商品コードKYSPD-20T2+3-1P
カテゴリーType 2+3 surge protection device 1P
公称システム電圧AC230V
ポール1P (Single-phase)
連続動作電圧 (Uc)75 / 150 / 275 / 320 / 385 / 440 V
公称放電電流(In、8/20 μs)10 kA
最大放電電流(Imax、8/20 μs)20 kA
電圧保護レベル(上)≤ 0.3-1.8 kV
応答時間< 25 ns
バックアップヒューズ(最大)63 A gL/gG
短絡電流定格(ISCCR)交流10kA
動作温度-40 °C ~ +70 °C
取り付け35 mm DINレール、EN 60715
エンクロージャー/保護熱可塑性 UL94 V-0 / IP20
リモート信号(RC)オプション; AC 250 V / 0.5 A; DC 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
規格IEC/EN 61643-11

配線と寸法

Connection diagram type 2+3 surge protection device 1P KYSPD-20T2+3-1P

Connection diagram type 2+3 surge protection device 1P KYSPD-20T2+3-1P

Dimensions type 2+3 surge protection device 1P KYSPD-20T2+3-1P

Dimensions type 2+3 surge protection device 1P KYSPD-20T2+3-1P

アプリケーション

  • Single-phase distribution panels in residential and office buildings.
  • Protection of sensitive electronic devices and appliances from transient surges.
  • Downstream coordination with upstream Type 1 surge arresters in TT/TN networks.

よくあるご質問

  • What class of SPD is KYSPD-20T2+3-1P? It is Class II+III, Type 2+3 according to IEC/EN 61643-11.
  • サージ放電容量は? In 10 kA, Imax 20 kA per pole.
  • Where can it be installed? In single-phase 230 V AC electrical panels.
  • リモート故障シグナリングの機能はありますか? はい、オプションでRC接点が利用できます。.
  • バックアップヒューズの最大定格は? 63 A gL/gG.
詳細な価格と技術サポートについては お問い合わせ.もっとKuangyaのソリューションを探る DC SPD, ACサージ保護.

レビュー

レビューはまだありません。

“Type 2+3 Surge Protection Device 1P KYSPD-20T2+3-1P | Kuangya” の口コミを投稿します

メールアドレスが公開されることはありません。 が付いている欄は必須項目です