Endereço
304 North Cardinal
St. Dorchester Center, MA 02124
Horas de trabalho
De segunda a sexta-feira: das 7h às 19h
Fim de semana: 10:00 - 17:00
RCBO VAL003 / VAL003N - Disjuntor de corrente residual monopolar+N com proteção contra sobrecorrente
rcbo single pole (1P+N) for residential & commercial circuits, In 5–40A, curves B/C.
Type AC / Type A, sensitivities 6 / 10 / 30 / 100 / 300 mA; Icn up to 10 kA @240V (VAL003) / 15 kA @120V (VAL003N).
Certified SEMKO / UKCA / CE / SAA; electrical & mechanical endurance 2,000 cycles.
rcbo polo único VAL003 / VAL003N delivers combined residual-current and overcurrent protection in a compact 1P+N form factor (5–40 A), with Type AC/A, multiple IΔn options and B/C curves for residential and commercial circuits.
Visão geral
VAL003 and VAL003N are compact modular RCBOs designed to provide combined protection against overload, short-circuit and residual current faults on single-phase distribution branches. Both variants share the same compact 1P+N footprint and current range (5–40 A), while their rated voltage and breaking capacity differ to fit regional grids: VAL003 targets 240 V systems (up to 10 kA Icn), and VAL003N targets 120 V systems (up to 15 kA Icn). With selectable residual current types (AC / A) and multiple sensitivities (6 / 10 / 30 / 100 / 300 mA), the series suits residential, commercial and light industrial applications where space efficiency and reliable nuisance-trip control are required.
Principais recursos
- Form factor: 1P+N (single-pole + neutral), compact modular width
- Rated current (In): 5–40 A (typical steps: 5/6/10/16/20/25/32/40 A)
- Residual current type: Type AC / Type A
- Sensitivity options (IΔn): 6 / 10 / 30 / 100 / 300 mA
- Tripping curves: B (3–5×In) e C (5–10×In)
- Breaking capacity (Icn): up to 10 kA @ 240 V (VAL003); 15 kA @ 120 V (VAL003N)
- Service life: electrical 2,000 cycles / mechanical 2,000 cycles
- Front test button (T) for routine residual function verification
- Standards & compliance: IEC/EN 61009-1; certifications SEMKO / UKCA / CE / SAA
RCBO Single Pole Technical Data (VAL003 / VAL003N)
| Parâmetro | VAL003 | VAL003N |
|---|---|---|
| Postes | 1P+N (single-pole + neutral) | |
| Rated current (In) | 5–40 A | 5–40 A |
| Rated voltage (Ue) | AC 240 V | AC 120 V |
| Frequência | 50/60 Hz | |
| Residual current type | Type AC / Type A | |
| Rated residual current (IΔn) | 6 / 10 / 30 / 100 / 300 mA | |
| Tripping characteristic (MCB curve) | B: 3–5 × In; C: 5–10 × In | |
| Breaking capacity (Icn) | 4.5 / 6 / 10 kA @ 240 V | 15 kA @ 120 V |
| Resistência | Electrical: 2,000 cycles; Mechanical: 2,000 cycles | |
| Padrões | IEC/EN 61009-1 | |
| Certificações | SEMKO, UKCA, CE, SAA | |
| Instalação | DIN-rail mounting; front wiring; test button (T) | |
| Recommended applications | Residential branch circuits, commercial lighting & sockets, small equipment feeds | |
Aplicativos
- Residential distribution boards: lighting, socket circuits
- Commercial offices & retail: small loads and outlets
- Public facilities: classrooms, small rooms, admin areas
- Light industrial auxiliaries where 1P+N and In ≤ 40 A are sufficient
Certifications & Compliance
Conforms to IEC/EN 61009-1, with certifications SEMKO, UKCA, CE, and SAA.
Refer to local codes for coordination and selectivity with upstream protective devices.
PERGUNTAS FREQUENTES
What is the difference between VAL003 and VAL003N?
They share the same 1P+N form factor and current range (5–40 A) and support both Type AC and Type A residual protections. VAL003 targets 240 V grids with up to 10 kA Icn; VAL003N targets 120 V grids with 15 kA Icn.
Which sensitivities (IΔn) are available?
6 / 10 / 30 / 100 / 300 mA. For typical socket and lighting circuits, 30 mA is most common; 6–10 mA may be used for higher touch-safety requirements; 100–300 mA are generally for special coordination scenarios per local codes.
How do I choose between curve B and curve C?
Use curve B (3–5×In) for resistive/lightly inductive loads; use curve C (5–10×In) for circuits with higher inrush (e.g., motors, transformers). Always verify with upstream protection and local standards.
Can it be used in light industrial panels?
Yes, within its ratings (1P+N, up to 40 A). For larger currents, three-phase systems, or special waveforms (e.g., EV / Type B), choose other series models accordingly.
Seja o primeiro a avaliar “RCBO VAL003 / VAL003N — Single-Pole+N Residual Current Breaker with Overcurrent Protection”
Avaliações
Não há avaliações ainda.