Endereço
304 North Cardinal
St. Dorchester Center, MA 02124
Horas de trabalho
De segunda a sexta-feira: das 7h às 19h
Fim de semana: 10:00 - 17:00
Surge Protection Device for Elevators KYSPD-40T2-3+1 | Kuangya
Surge protection device for elevators, designed for three-phase + N (3+1 topology) at 230/400 V AC.
Surge ratings: In 20 kA (8/20 µs), Imax 40 kA (8/20 µs), Up ≤ 1.5–2.0 kV depending on Uc.
Features L–N MOV + N–PE GDT coordinated protection, pluggable modules, thermal disconnector, optional RC signaling contacts.
designed to safeguard lift control systems, drives, and associated electrical panels
in residential, commercial, and industrial buildings. Using a 3+1 topology, it provides
coordinated protection for L-N (MOV) and N-PE (GDT) paths in 230/400 V AC networks.This device is built for high reliability in vertical transport applications,
where electrical disturbances may cause malfunction or downtime. Its pluggable design,
thermal disconnector, and clear status indicators simplify service and ensure safety.
Optional RC contacts allow real-time monitoring and integration with building management systems.
Principais recursos
- Optimized surge protection for elevator systems (control panels, drives, motors).
- 3+1 topology: MOV protection L–N and coordinated GDT+MOV protection N–PE.
- Nominal discharge current (In): 20 kA (8/20 μs); Maximum discharge current (Imax): 40 kA (8/20 μs).
- Voltage protection level (Up): ≤ 1.5–2.0 kV depending on Uc.
- Fast response time < 25 ns for L–N; < 100 ns for N–PE.
- Back-up fuse: max 125 A gL/gG; ISCCR 25 kA AC.
- Optional RC remote signaling contacts: AC 250 V / 0.5 A; DC 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A.
- Housing IP20, thermoplastic UL94 V-0; operating temperature -40 °C to +80 °C.
- DIN rail mounting (35 mm, EN 60715); IEC/EN 61643-11 compliant.
Especificações
| Código do produto | KYSPD-40T2-3+1 |
|---|---|
| Categoria | Surge protection device for elevators |
| Tensão nominal do sistema | 230/400 V AC |
| Topology | 3+1 (L–N MOV, N–PE GDT+MOV) |
| Continuous Operating Voltage (Uc) | 230 V / 320 V / 385 V |
| Corrente de descarga nominal (In, 8/20 μs) | 20 kA |
| Maximum Discharge Current (Imax, 8/20 μs) | 40 kA |
| Nível de proteção de tensão (para cima) | ≤ 1.5–2.0 kV |
| Tempo de resposta | < 25 ns (L–N) / < 100 ns (N–PE) |
| Back-Up Fuse (max) | 125 A gL/gG |
| Classificação de corrente de curto-circuito (ISCCR) | 25 kA AC |
| Temperatura operacional | -40 °C to +80 °C |
| Montagem | 35 mm DIN rail, EN 60715 |
| Enclosure / Protection | Thermoplastic UL94 V-0 / IP20 |
| Remote Signaling (RC) | Optional; AC 250 V / 0.5 A; DC 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A |
| Padrões | IEC/EN 61643-11 |
Fiação e dimensões
Connection diagram surge protection device for elevators KYSPD-40T2-3+1
Dimensions surge protection device for elevators KYSPD-40T2-3+1
Aplicativos
- Elevator control panels and drive systems in residential and commercial buildings.
- Protection of lift equipment from lightning-induced and switching surges.
- Building electrical panels requiring coordinated 3+1 surge protection with monitoring.
PERGUNTAS FREQUENTES
- Why is this SPD suitable for elevators? It uses a 3+1 topology optimized for protecting sensitive elevator controls and drives.
- What is its surge capacity? In 20 kA, Imax 40 kA per path.
- Does it support monitoring? Yes, optional RC contacts provide remote fault indication.
- What is the backup fuse rating? Maximum 125 A gL/gG.
- Which standards does it comply with? IEC/EN 61643-11.
Seja o primeiro a avaliar “Surge Protection Device for Elevators KYSPD-40T2-3+1 | Kuangya”
Avaliações
Não há avaliações ainda.