Endereço
304 North Cardinal
St. Dorchester Center, MA 02124
Horas de trabalho
De segunda a sexta-feira: das 7h às 19h
Fim de semana: 10:00 - 17:00
Chave de transferência manual KYMTS-63A 2P
O chave de transferência manual para gerador 63A 2P safely changes over line + neutral in single-phase AC systems.
Compact body with ergonomic I–0–II handle, copper contacts, DIN-rail or panel mounting.
IEC 60947-3 compliant, suitable for residential backup, PV, and ESS applications.
Visão geral
O chave de transferência manual para gerador (KYMTS-63A 2P) is designed for single-phase AC systems where both line and neutral must be switched for safe and reliable changeover. It allows manual I–0–II switching between utility, generator, or PV inverter, preventing back-feeding and ensuring supply continuity.
For more models and selection guidance, see the Chave de transferência manual landing page. In PV/ESS systems, the KYMTS-63A 2P can be combined with Caixas combinadoras fotovoltaicas, disjuntorese Fusíveis CC. Reference IEC padrões e CE marking requirements for compliance.
Principais recursos
- 63A, 2P design switches both line and neutral conductors.
- Clear I / 0 / II handle positions for safe and intuitive operation.
- Contatos de cobre ensure high conductivity and low power loss.
- Suportes de corpo compactos Painel / trilho DIN instalação.
- Ideal para generator changeover and PV inverter transfer.
- Em conformidade com IEC 60947-3 padrões de chaves seccionadoras.
Especificações
| Modelo | KYMTS-63A 2P |
|---|---|
| Postes | 2P (L+N) |
| Corrente nominal (In) | 63A |
| Tensão operacional nominal (Ue) | 240V AC |
| Frequência | 50/60Hz |
| Tensão de isolamento (Ui) | 690V |
| Montagem | Trilho DIN / Painel |
| Padrão de referência | IEC 60947-3 |
Fiação e dimensões
Aplicativos
- Residential generator backup requiring L+N switching
- Single-phase PV inverter source changeover
- Shops and small commercial loads with dual-source supply
- ESS auxiliary circuits and microgrid feeders
PERGUNTAS FREQUENTES
What is a manual transfer switch for generator?
It is a device that safely switches a single-phase 63A load between utility and generator/PV inverter, isolating both line and neutral conductors.
When should I choose a 2P switch instead of 1P?
Use a 2P switch when both line and neutral must be isolated during source transfer for enhanced safety and compliance.
Where can I compare other models?
Visit the Chave de transferência manual landing page for full 1P/2P/3P/4P options.
Precisa de uma cotação?
Looking for a chave de transferência manual para gerador? Entre em contato conosco today for datasheets, technical support, and pricing.
Seja o primeiro a avaliar “KYMTS-63A 2P Manual Transfer Switch”
Avaliações
Não há avaliações ainda.