Endereço
304 North Cardinal
St. Dorchester Center, MA 02124
Horas de trabalho
De segunda a sexta-feira: das 7h às 19h
Fim de semana: 10:00 - 17:00
VKL003 / VKL003N RCBO - monopolar + neutro (1P+N) 5-40A
rcbo single pole (1P+N) RCBO for residential & commercial branches, In 5–40A, curves B/C.
Type AC / Type A, sensitivities IΔn 6 / 10 / 30 / 100 / 300 mA; Icn up to 10 kA @ 240 V (VKL003) / 15 kA @ 120 V (VKL003N).
SEMKO / UKCA / CE / SAA certified; electrical & mechanical endurance 2,000 cycles; DIN-rail mounting with front test button.
rcbo polo único VKL003 / VKL003N is a compact 1P+N residual-current circuit breaker with overcurrent protection, rated 5–40 A with Type AC/A, multiple sensitivities, and B/C curves for residential and commercial distribution circuits.
Visão geral
VKL003 and VKL003N provide combined protection against overload, short circuit, and
residual current faults on single-phase branches. Both share the same 1P+N form factor
and current range (5–40 A). VKL003 targets 240 V systems with breaking capacity
up to 10 kA, while VKL003N is optimized for 120 V systems with
15 kA Icn. Type AC and Type A options plus five sensitivity levels enable precise
coordination across lighting and socket circuits.
Principais recursos
- Form factor: 1P+N (single-pole + neutral), compact modular width
- Rated current (In): 5–40 A (typical steps: 5/6/10/16/20/25/32/40 A)
- Residual current type: Type AC / Type A
- Sensitivities (IΔn): 6 / 10 / 30 / 100 / 300 mA
- Tripping curves: B (3–5×In), C (5–10×In)
- Breaking capacity (Icn): VKL003 4.5/6/10 kA @ 240 V; VKL003N 15 kA @ 120 V
- Frequency: 50/60 Hz; front test button (T) for routine verification
- Service life: electrical 2,000 cycles / mechanical 2,000 cycles
- Mounting: DIN-rail; front wiring; compact installation depth
RCBO Single Pole Technical Data — VKL003 / VKL003N
| Parâmetro | VKL003 | VKL003N |
|---|---|---|
| Postes | 1P+N (single-pole + neutral) | |
| Rated current (In) | 5–40 A | 5–40 A |
| Rated voltage (Ue) | AC 240 V | AC 120 V |
| Frequência | 50/60 Hz | |
| Residual current type | Type AC / Type A | |
| Rated residual current (IΔn) | 6 / 10 / 30 / 100 / 300 mA | |
| Tripping characteristic (MCB curve) | B: 3–5 × In; C: 5–10 × In | |
| Breaking capacity (Icn) | 4.5 / 6 / 10 kA @ 240 V | 15 kA @ 120 V |
| Resistência | Electrical 2,000 cycles; Mechanical 2,000 cycles | |
| Instalação | DIN-rail; front wiring; test button (T) | |
| Recommended applications | Residential & commercial lighting and socket branches | |
| Certificações | SEMKO, UKCA, CE, SAA | |
| Padrões | IEC/EN 61009-1 | |
Aplicativos
- Apartments & houses: lighting and socket circuits up to 40 A
- Commercial offices & retail: small-load branch protection
- Public buildings: admin rooms, classrooms, auxiliary circuits
Padrões e conformidade
Conforms to IEC/EN 61009-1. Certified by SEMKO, UKCA, CE, SAA.
Coordinate with upstream protection and follow local codes for selectivity and fault levels.
PERGUNTAS FREQUENTES
What is the difference between VKL003 and VKL003N?
Both are 1P+N, 5–40 A with Type AC/A and five IΔn levels. VKL003 is for 240 V (up to 10 kA Icn); VKL003N is for 120 V (15 kA Icn).
When should I choose curve B or curve C?
Use curve B (3–5×In) for resistive/lightly inductive loads; use curve C (5–10×In) for circuits with higher inrush such as motors or transformers.
What is the advantage of an rcbo single pole form factor?
The compact 1P+N layout saves rail width while providing full residual and overcurrent protection—ideal for lighting and socket branches.
Seja o primeiro a avaliar “VKL003 / VKL003N RCBO — Single-Pole + Neutral (1P+N) 5–40A”
Avaliações
Não há avaliações ainda.