第2種サージ防護デバイス KYSPD-12.5T1+2-2P|Kuangya

  • 2極 type 2 surge protective device for 230/400 V AC distribution boards.

  • 20 kA (8/20 μs), Imax 40 kA (8/20 μs), Uc AC275V; fast response and low Up.

  • Pluggable module with thermal disconnector, visual status window, optional RC signaling.

お見積もり

カテゴリー:
The Kuangya KYSPD-12.5T1+2-2P is a compact two-pole type 2 surge protective device designed for residential, commercial, and light industrial panels. This type 2 surge protective device provides reliable protection against switching transients and indirect lightning surges, delivering low residual voltage to safeguard downstream equipment.

主な特徴

  • Two-pole configuration optimized as a type 2 surge protective device for 230/400 V AC systems.
  • Nominal discharge current (In): 20 kA (8/20 μs); Max discharge (Imax): 40 kA (8/20 μs).
  • Max continuous operating voltage (Uc): 275 V AC; low voltage protection level (Up) for better insulation coordination.
  • 高速応答時間 < 25 ns。.
  • Pluggable replaceable cartridge with thermal disconnector and green/red indicator window.
  • Optional RC remote signaling contacts for panel monitoring.
  • Thermoplastic housing UL94 V-0; IP20 built-in; DIN 35 mm rail mounting (EN 60715).
  • Reliable mid-stage protection using a type 2 surge protective device in coordinated SPD systems.

仕様

パラメータ価値
商品コードKYSPD-12.5T1+2-2P
カテゴリーType 2 Surge Protective Device (2P)
公称システム電圧 (Uo/Un)230 / 400 V AC
最大連続使用電圧 (Uc)AC275V
公称放電電流(In、8/20 μs)20 kA
最大放電電流放電電流 (Imax, 8/20 μs)40 kA
電圧保護レベル(上)≤ 1.5 kV (typ.)
応答時間< 25 ns
バックアップヒューズ(最大)125 A gL/gG
短絡電流定格(ISCCR)25 kA
動作温度-40 °C ... +70 °C
取り付け35 mm DINレール (EN 60715)
エンクロージャー熱可塑性、UL94 V-0
保護等級IP20(内蔵)
リモート信号オプションのRC接点
規格IEC/EN 61643-11

As a mid-stage type 2 surge protective device, this unit coordinates with upstream Type 1 and downstream Type 3 devices to achieve full protection.

配線と寸法

  • 接続図: kyspd-12.5t1+2-2p-connection
  • type 2 surge protective device wiring diagram 2P
  • 寸法: kyspd-12.5t1+2-2p-dimensions
  • type 2 surge protective device dimensions 2P

アプリケーション

  • Residential and commercial distribution boards using a type 2 surge protective device.
  • Coordinated protection between Type 1 and Type 3 stages in AC power systems.
  • Panels supplying sensitive electronics and HVAC controls.

よくあるご質問

Where is KYSPD-12.5T1+2-2P installed?

Install it in distribution panels as a mid-stage type 2 surge protective device, ideally downstream of a Type 1 SPD.

What discharge ratings does it provide?

これは type 2 surge protective device provides In 20 kA and Imax 40 kA (8/20 μs).

遠隔監視に対応していますか?

Yes. Optional RC contacts allow remote status signaling of the type 2 surge protective device.

どのような基準を満たしているのか?

IEC/EN 61643-11 低電圧サージ保護装置用。.

お見積もり - 関連商品 AC MCB, 手動トランスファースイッチ

レビュー

レビューはまだありません。

“Type 2 Surge Protective Device KYSPD-12.5T1+2-2P | Kuangya” の口コミを投稿します

メールアドレスが公開されることはありません。 が付いている欄は必須項目です