住所
304ノース・カーディナル
セント・ドーチェスター・センター（マサチューセッツ州02124
勤務時間
月曜日～金曜日：午前7時～午後7時
週末午前10時～午後5時
タイプ1+2サージ防護デバイス4P KYSPD-12.5T1+2-4P｜Kuangya
Four-pole type 1+2 surge protective device 4P for 230/400 V AC TN-S distribution boards.
サージ定格： Iimp 12.5 kA (10/350 µs), 20kA時 (8/20 µs), Imax 50 kA (8/20 µs); typical Up 1.6–2.0 kV.
Pluggable modules, thermal disconnector with status indicator, optional RC signaling, DIN-rail 35 mm.
type 1+2 surge protective device 4P designed for service entrance
and main distribution boards on 230/400 V AC TN-S systems. It combines
Type 1 lightning current handling with Type 2 surge discharge performance
to safeguard downstream equipment.Modules are pluggable with a thermal disconnector and clear
status window. Optional RC contacts provide remote fault signaling for
integration with monitoring systems.
主な特徴
- Combination Type 1+2 protective device for TN-S systems.
- Surge current handling: Iimp 12.5 kA (10/350 µs), In 20 kA, Imax 50 kA.
- Voltage protection level Up typically 1.6–2.0 kV (per variant).
- Response time < 25 ns; high-energy MOV design.
- Pluggable replaceable cartridges with green/red fault indicator.
- Optional RC remote signaling for BMS/PLC integration.
- Thermoplastic housing UL94-V0, IP20 degree of protection.
- Mounting on 35 mm DIN rail (EN 60715).
- Standards compliance: IEC/EN 61643-11.
仕様
| 商品コード | KYSPD-12.5T1+2-4P |
|---|---|
| カテゴリー | Type 1+2 surge protective device 4P |
| Nominal System Voltage (Uo/Un) | AC230/400 V |
| Max. Continuous Operating Voltage (Uc) | 275 V / 320 V / 385 V / 440 V (variants) |
| Iimp (10/350 µs) | 12.5 kA |
| In (8/20 µs) | 20 kA |
| 最大値（8/20 µs） | 50 kA |
| 上へ | 1.6–2.0 kV |
| 応答時間 | < 25 ns |
| Backup Fuse (max) | 160 A gL/gG |
| ISCCR | AC25kA |
| 動作温度 | -40 °C ～ +70 °C |
| 取り付け | 35 mm DIN rail (EN 60715) |
| エンクロージャー | Thermoplastic, UL94 V-0 |
| 保護等級 | IP20 (built-in) |
| Remote Signaling | Optional RC contacts |
| 規格 | IEC/EN 61643-11 |
配線と寸法
Wiring diagram type 1+2 surge protective device 4P
Dimensions type 1+2 surge protective device 4P
アプリケーション
- Main distribution boards in industrial and commercial buildings.
- Service entrance protection for residential complexes.
- Panels requiring coordinated Type 1+2 surge protective devices for TN-S networks.
よくあるご質問
- Where should this device be installed? At service entrance or main distribution boards on TN-S systems.
- What surge currents can it handle? Iimp 12.5 kA (10/350 µs), In 20 kA, Imax 50 kA.
- リモート・シグナルに対応しているか？ はい、オプションでRC接点が利用できます。.
- Is it suitable for residential or industrial use? Both; it supports residential, commercial, and industrial TN-S boards.
- どの規格に準拠しているのか？ IEC/EN 61643-11.
“Type 1+2 Surge Protective Device 4P KYSPD-12.5T1+2-4P | Kuangya” の口コミを投稿します
レビュー
レビューはまだありません。