住所
304ノース・カーディナル
セント・ドーチェスター・センター（マサチューセッツ州02124
勤務時間
月曜日～金曜日：午前7時～午後7時
週末午前10時～午後5時
VDL01 RCBOサーキットブレーカ - 2P/4P 調節可能な残留電流保護（最大90A）
rcbo circuit breaker VDL01 with 2P/4P options and adjustable current pairs (5/15A → 60/90A), designed for mains/feeder protection.
Normal & Type S (time-delay) residual protection with IΔn 300 mA / 500 mA, coordinated selectivity for upstream devices.
Icn 3 kA, 230/240 V & 400/415 V, digital current display, anti-tamper design; built to NF C 61450 / NF C 62411 / IEC 61009.
rcbo circuit breaker VDL01 is a two- or four-pole adjustable device combining residual-current and overcurrent protection for mains and feeder circuits, with selectable Normal and Type S (time-delay) characteristics.
概要
VDL01 integrates residual-current and overcurrent protection into a compact 2P/4P form.
It features adjustable current pairs to match upstream/downstream coordination and
offers Normal そして タイプS (time-delay) residual functions with higher
sensitivities (IΔn 300 mA / 500 mA) suitable for main/feeder selectivity.
A digital current display and anti-tamper design improve on-site setting and security.
主な特徴
- ポール： 2P そして 4P for single- and three-phase systems
- Adjustable current pairs: 5/15 A, 10/30 A, 15/45 A, 30/60 A, 60/90 A
- Residual modes: Normal & タイプS (time-delay for selective protection)
- 感度（IΔn）： 300 mA / 500 mA
- 破断能力（Icn）： 3 kA
- Rated voltage: 230/240 V そして 400/415 V, 50/60 Hz
- Digital current display; anti-tamper design; temperature-insensitive operation
- 標準： NF C 61450, NF C 62411, IEC 61009
RCBO Circuit Breaker Technical Data — VDL01
| パラメータ | VDL01 (2P) | VDL01 (4P) |
|---|---|---|
| ポール | 2P | 4P |
| Adjustable current pairs (A) | 5/15, 10/30, 15/45, 30/60, 60/90 | |
| 定格電圧 (Ue) | 230/240 V | 400/415 V |
| 頻度 | 50/60 Hz | |
| Residual mode | Normal / Type S (time-delay) | |
| 定格残留電流 (IΔn) | 300 mA / 500 mA | |
| 破断容量（Icn） | 3 kA | |
| Indication / Interface | Digital current display; anti-tamper design | |
| Temperature sensitivity | Insensitive (per product note) | |
| 規格 | NF C 61450; NF C 62411; IEC 61009 | |
アプリケーション
- Mains and feeder circuits requiring selective residual protection (Type S)
- Commercial and public buildings with coordinated upstream devices
- Three-phase distribution where 4P selectivity and higher IΔn are needed
- Panels needing adjustable current pairs for field tuning
規格とコンプライアンス
Designed in accordance with NF C 61450, NF C 62411そして IEC 61009. Check local codes for selectivity and discrimination requirements.
よくあるご質問
What does Type S mean on VDL01?
Type S is a time-delay residual function that helps achieve selectivity with downstream RCD/RCBOs, reducing nuisance trips on mains/feeder circuits.
How do the adjustable current pairs work?
You can select among 5/15, 10/30, 15/45, 30/60, and 60/90 A pairs to match the protected feeder and upstream device, using the built-in digital display to verify settings.
When should I choose 4P over 2P?
Use 4P for three-phase systems or when neutral switching and full four-pole isolation are required; 2P fits single-phase feeders.
Which IΔn should I use?
VDL01 offers 300 mA and 500 mA suited for upstream selectivity. Choose per local codes and coordination studies.
“VDL01 RCBO Circuit Breaker — 2P/4P Adjustable Residual Current Protection (up to 90A)” の口コミを投稿します
レビュー
レビューはまだありません。