Adresse
304 North Cardinal
St. Dorchester Center, MA 02124
Heures de travail
Du lundi au vendredi : de 7h00 à 19h00
Le week-end : 10H00 - 17H00
KYMTS-63A Commutateur de transfert manuel 2P
Le commutateur de transfert manuel pour groupe électrogène 63A 2P safely changes over line + neutral in single-phase AC systems.
Compact body with ergonomic I–0–II handle, copper contacts, DIN-rail or panel mounting.
IEC 60947-3 compliant, suitable for residential backup, PV, and ESS applications.
Vue d'ensemble
Le commutateur de transfert manuel pour groupe électrogène (KYMTS-63A 2P) is designed for single-phase AC systems where both line and neutral must be switched for safe and reliable changeover. It allows manual I–0–II switching between utility, generator, or PV inverter, preventing back-feeding and ensuring supply continuity.
For more models and selection guidance, see the Commutateur de transfert manuel landing page. In PV/ESS systems, the KYMTS-63A 2P can be combined with Boîtes de raccordement PV, disjoncteurset Fusibles DC. Reference CEI normes et Marquage CE requirements for compliance.
Caractéristiques principales
- 63A, 2P design switches both line and neutral conductors.
- Clair I / 0 / II handle positions for safe and intuitive operation.
- Contacts en cuivre ensure high conductivity and low power loss.
- Supports compacts pour le corps Rail DIN / panneau l'installation.
- Idéal pour generator changeover and PV inverter transfer.
- Conforme à IEC 60947-3 les normes relatives aux interrupteurs-sectionneurs.
Spécifications
| Modèle | KYMTS-63A 2P |
|---|---|
| Pôles | 2P (L+N) |
| Courant nominal (In) | 63A |
| Tension opérationnelle nominale (Ue) | 240V AC |
| Fréquence | 50/60Hz |
| Tension d'isolation (Ui) | 690V |
| Montage | Rail DIN / Panneau |
| Norme de référence | IEC 60947-3 |
Câblage et dimensions
Applications
- Residential generator backup requiring L+N switching
- Monophasé PV inverter source changeover
- Shops and small commercial loads with dual-source supply
- ESS auxiliary circuits and microgrid feeders
FAQ
What is a manual transfer switch for generator?
It is a device that safely switches a single-phase 63A load between utility and generator/PV inverter, isolating both line and neutral conductors.
When should I choose a 2P switch instead of 1P?
Use a 2P switch when both line and neutral must be isolated during source transfer for enhanced safety and compliance.
Where can I compare other models?
Visitez le site Commutateur de transfert manuel landing page for full 1P/2P/3P/4P options.
Besoin d'un devis ?
Looking for a commutateur de transfert manuel pour groupe électrogène? Contactez nous today for datasheets, technical support, and pricing.
Soyez le premier à laisser votre avis sur “KYMTS-63A 2P Manual Transfer Switch”
Avis
Il n’y a pas encore d’avis.