Dirección
304 North Cardinal
Dorchester Center, MA 02124
Horas de trabajo
De lunes a viernes: de 7.00 a 19.00 horas
Fin de semana: 10.00 A 17.00 HORAS
KYMTS-63A Interruptor de transferencia manual 2P
En interruptor de transferencia manual para generador 63A 2P safely changes over line + neutral in single-phase AC systems.
Compact body with ergonomic I–0–II handle, copper contacts, DIN-rail or panel mounting.
IEC 60947-3 compliant, suitable for residential backup, PV, and ESS applications.
Visión general
En interruptor de transferencia manual para generador (KYMTS-63A 2P) is designed for single-phase AC systems where both line and neutral must be switched for safe and reliable changeover. It allows manual I–0–II switching between utility, generator, or PV inverter, preventing back-feeding and ensuring supply continuity.
For more models and selection guidance, see the Interruptor de transferencia manual landing page. In PV/ESS systems, the KYMTS-63A 2P can be combined with Cajas de conexiones fotovoltaicas, disyuntoresy Fusibles CC. Referencia IEC normas y Marcado CE requirements for compliance.
Características principales
- 63A, 2P design switches both line and neutral conductors.
- Clear I / 0 / II handle positions for safe and intuitive operation.
- Contactos de cobre ensure high conductivity and low power loss.
- Soportes compactos Carril DIN / panel instalación.
- Ideal para generator changeover and PV inverter transfer.
- Cumple IEC 60947-3 normas sobre interruptores-seccionadores.
Especificaciones
| Modelo | KYMTS-63A 2P |
|---|---|
| Postes | 2P (L+N) |
| Corriente nominal (In) | 63A |
| Tensión nominal de funcionamiento (Ue) | 240 V CA |
| Frecuencia | 50/60 Hz |
| Tensión de aislamiento (Ui) | 690V |
| Montaje | Carril DIN / Panel |
| Norma de referencia | IEC 60947-3 |
Cableado y dimensiones
Aplicaciones
- Residential generator backup requiring L+N switching
- Monofásico Inversor fotovoltaico source changeover
- Shops and small commercial loads with dual-source supply
- ESS auxiliary circuits and microgrid feeders
PREGUNTAS FRECUENTES
What is a manual transfer switch for generator?
It is a device that safely switches a single-phase 63A load between utility and generator/PV inverter, isolating both line and neutral conductors.
When should I choose a 2P switch instead of 1P?
Use a 2P switch when both line and neutral must be isolated during source transfer for enhanced safety and compliance.
Where can I compare other models?
Visit the Interruptor de transferencia manual landing page for full 1P/2P/3P/4P options.
¿Necesita un presupuesto?
Looking for a interruptor de transferencia manual para generador? Póngase en contacto con nosotros today for datasheets, technical support, and pricing.
Sé el primero en valorar “KYMTS-63A 2P Manual Transfer Switch”
Valoraciones
No hay valoraciones aún.