Dirección
304 North Cardinal
Dorchester Center, MA 02124
Horas de trabajo
De lunes a viernes: de 7.00 a 19.00 horas
Fin de semana: 10.00 A 17.00 HORAS
Type 2 Surge Protective Device KYSPD-12.5T1+2-2P | Kuangya
Two-pole type 2 surge protective device for 230/400 V AC distribution boards.
En 20 kA (8/20 μs), Imax 40 kA (8/20 μs), Uc 275 V AC; fast response and low Up.
Pluggable module with thermal disconnector, visual status window, optional RC signaling.
Características principales
- Two-pole configuration optimized as a type 2 surge protective device for 230/400 V AC systems.
- Nominal discharge current (In): 20 kA (8/20 μs); Max discharge (Imax): 40 kA (8/20 μs).
- Max continuous operating voltage (Uc): 275 V AC; low voltage protection level (Up) for better insulation coordination.
- Tiempo de respuesta rápido < 25 ns.
- Pluggable replaceable cartridge with thermal disconnector and green/red indicator window.
- Optional RC remote signaling contacts for panel monitoring.
- Thermoplastic housing UL94 V-0; IP20 built-in; DIN 35 mm rail mounting (EN 60715).
- Reliable mid-stage protection using a type 2 surge protective device in coordinated SPD systems.
Especificaciones
| Parámetro | Valor |
|---|---|
| Código del producto | KYSPD-12.5T1+2-2P |
| Categoría | Type 2 Surge Protective Device (2P) |
| Tensión nominal del sistema (Uo/Un) | 230 / 400 V CA |
| Máx. Tensión de funcionamiento continuo (Uc) | 275 V AC |
| Corriente nominal de descarga (In, 8/20 μs) | 20 kA |
| Máx. Corriente de descarga (Imax, 8/20 μs) | 40 kA |
| Nivel de protección de tensión (arriba) | ≤ 1.5 kV (typ.) |
| Tiempo de respuesta | < 25 ns |
| Fusible de reserva (máx.) | 125 A gL/gG |
| Corriente nominal de cortocircuito (ISCCR) | 25 kA |
| Temperatura de funcionamiento | -40 °C ... +70 °C |
| Montaje | Carril DIN de 35 mm (EN 60715) |
| Recinto | Termoplástico, UL94 V-0 |
| Grado de protección | IP20 (integrado) |
| Señalización remota | Contactos RC opcionales |
| Normas | CEI/EN 61643-11 |
As a mid-stage type 2 surge protective device, this unit coordinates with upstream Type 1 and downstream Type 3 devices to achieve full protection.
Cableado y dimensiones
- Esquema de conexión: kyspd-12.5t1+2-2p-connection
- Dimensiones: kyspd-12.5t1+2-2p-dimensions
Aplicaciones
- Residential and commercial distribution boards using a type 2 surge protective device.
- Coordinated protection between Type 1 and Type 3 stages in AC power systems.
- Panels supplying sensitive electronics and HVAC controls.
PREGUNTAS FRECUENTES
Where is KYSPD-12.5T1+2-2P installed?
Install it in distribution panels as a mid-stage type 2 surge protective device, ideally downstream of a Type 1 SPD.
What discharge ratings does it provide?
Este type 2 surge protective device provides In 20 kA and Imax 40 kA (8/20 μs).
Does it support remote monitoring?
Yes. Optional RC contacts allow remote status signaling of the type 2 surge protective device.
What standards does it meet?
IEC/EN 61643-11 for low-voltage surge protective devices.
Sé el primero en valorar “Type 2 Surge Protective Device KYSPD-12.5T1+2-2P | Kuangya”
Valoraciones
No hay valoraciones aún.