Dirección
304 North Cardinal
Dorchester Center, MA 02124
Horas de trabajo
De lunes a viernes: de 7.00 a 19.00 horas
Fin de semana: 10.00 A 17.00 HORAS
KYMTS-63A Interruptor de transferencia manual 2P
En interruptor de transferencia manual para generador 63A 2P safely changes over line + neutral in single-phase AC systems.
Cuerpo compacto con mango ergonómico I-0-II, contactos de cobre, montaje en carril DIN o panel.
IEC 60947-3 compliant, suitable for residential backup, PV, and ESS applications.
Visión general
En interruptor de transferencia manual para generador (KYMTS-63A 2P) is designed for single-phase AC systems where both line and neutral must be switched for safe and reliable changeover. It allows manual I–0–II switching between utility, generator, or PV inverter, preventing back-feeding and ensuring supply continuity.
For more models and selection guidance, see the Interruptor de transferencia manual landing page. In PV/ESS systems, the KYMTS-63A 2P can be combined with Cajas de conexiones fotovoltaicas, disyuntoresy Fusibles CC. Referencia IEC normas y Marcado CE requirements for compliance.
Características principales
- 63A, 2P design switches both line and neutral conductors.
- Clear I / 0 / II handle positions for safe and intuitive operation.
- Contactos de cobre ensure high conductivity and low power loss.
- Soportes compactos Carril DIN / panel instalación.
- Ideal para generator changeover and PV inverter transfer.
- Cumple IEC 60947-3 normas sobre interruptores-seccionadores.
Especificaciones
| Modelo | KYMTS-63A 2P |
|---|---|
| Postes | 2P (L+N) |
| Corriente nominal (In) | 63A |
| Tensión nominal de funcionamiento (Ue) | 240 V CA |
| Frecuencia | 50/60 Hz |
| Tensión de aislamiento (Ui) | 690V |
| Montaje | Carril DIN / Panel |
| Norma de referencia | IEC 60947-3 |
Cableado y dimensiones
Aplicaciones
- Residential generator backup requiring L+N switching
- Monofásico Inversor fotovoltaico source changeover
- Shops and small commercial loads with dual-source supply
- ESS auxiliary circuits and microgrid feeders
PREGUNTAS FRECUENTES
What is a manual transfer switch for generator?
It is a device that safely switches a single-phase 63A load between utility and generator/PV inverter, isolating both line and neutral conductors.
When should I choose a 2P switch instead of 1P?
Use a 2P switch when both line and neutral must be isolated during source transfer for enhanced safety and compliance.
Where can I compare other models?
Visite el Interruptor de transferencia manual landing page for full 1P/2P/3P/4P options.
¿Necesita un presupuesto?
En busca de un interruptor de transferencia manual para generador? Póngase en contacto con nosotros today for datasheets, technical support, and pricing.
Sé el primero en valorar “KYMTS-63A 2P Manual Transfer Switch”
Valoraciones
No hay valoraciones aún.