Dirección
304 North Cardinal
Dorchester Center, MA 02124
Horas de trabajo
De lunes a viernes: de 7.00 a 19.00 horas
Fin de semana: 10.00 A 17.00 HORAS
Surge Protection Device for Elevators KYSPD-40T2-3+1 | Kuangya
Surge protection device for elevators, designed for three-phase + N (3+1 topology) at 230/400 V AC.
Surge ratings: In 20 kA (8/20 µs), Imax 40 kA (8/20 µs), Up ≤ 1.5–2.0 kV en función de Uc.
Características L–N MOV + N–PE GDT coordinated protection, pluggable modules, thermal disconnector, optional RC signaling contacts.
designed to safeguard lift control systems, drives, and associated electrical panels
in residential, commercial, and industrial buildings. Using a 3+1 topology, it provides
coordinated protection for L-N (MOV) and N-PE (GDT) paths in 230/400 V AC networks.This device is built for high reliability in vertical transport applications,
where electrical disturbances may cause malfunction or downtime. Its pluggable design,
thermal disconnector, and clear status indicators simplify service and ensure safety.
Optional RC contacts allow real-time monitoring and integration with building management systems.
Características principales
- Optimized surge protection for elevator systems (control panels, drives, motors).
- 3+1 topology: MOV protection L–N and coordinated GDT+MOV protection N–PE.
- Nominal discharge current (In): 20 kA (8/20 μs); Maximum discharge current (Imax): 40 kA (8/20 μs).
- Voltage protection level (Up): ≤ 1.5–2.0 kV depending on Uc.
- Fast response time < 25 ns for L–N; < 100 ns for N–PE.
- Fusible de reserva: máx. 125 A gL/gG; ISCCR 25 kA CA.
- Optional RC remote signaling contacts: AC 250 V / 0.5 A; DC 250 V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A.
- Housing IP20, thermoplastic UL94 V-0; operating temperature -40 °C to +80 °C.
- Montaje en carril DIN (35 mm, EN 60715); conforme a IEC/EN 61643-11.
Especificaciones
| Código del producto | KYSPD-40T2-3+1 |
|---|---|
| Categoría | Surge protection device for elevators |
| Tensión nominal del sistema | 230/400 V CA |
| Topología | 3+1 (L–N MOV, N–PE GDT+MOV) |
| Tensión de funcionamiento continuo (Uc) | 230 V / 320 V / 385 V |
| Corriente nominal de descarga (In, 8/20 μs) | 20 kA |
| Corriente de descarga máxima (Imax, 8/20 μs) | 40 kA |
| Nivel de protección de tensión (arriba) | ≤ 1.5–2.0 kV |
| Tiempo de respuesta | < 25 ns (L-N) / < 100 ns (N-PE) |
| Fusible de reserva (máx.) | 125 A gL/gG |
| Corriente nominal de cortocircuito (ISCCR) | 25 kA CA |
| Temperatura de funcionamiento | -40 °C a +80 °C |
| Montaje | Carril DIN de 35 mm, EN 60715 |
| Cerramiento / Protección | Termoplástico UL94 V-0 / IP20 |
| Señalización remota (RC) | Opcional; CA 250 V / 0,5 A; CC 250 V / 0,1 A; 125 V / 0,2 A; 75 V / 0,5 A |
| Normas | CEI/EN 61643-11 |
Cableado y dimensiones
Connection diagram surge protection device for elevators KYSPD-40T2-3+1
Dimensions surge protection device for elevators KYSPD-40T2-3+1
Aplicaciones
- Elevator control panels and drive systems in residential and commercial buildings.
- Protection of lift equipment from lightning-induced and switching surges.
- Building electrical panels requiring coordinated 3+1 surge protection with monitoring.
PREGUNTAS FRECUENTES
- Why is this SPD suitable for elevators? It uses a 3+1 topology optimized for protecting sensitive elevator controls and drives.
- What is its surge capacity? In 20 kA, Imax 40 kA per path.
- Does it support monitoring? Yes, optional RC contacts provide remote fault indication.
- What is the backup fuse rating? Maximum 125 A gL/gG.
- ¿Qué normas cumple? IEC/EN 61643-11.
Sé el primero en valorar “Surge Protection Device for Elevators KYSPD-40T2-3+1 | Kuangya”
Valoraciones
No hay valoraciones aún.