{"id":4807,"date":"2026-10-23T10:32:36","date_gmt":"2026-10-23T02:32:36","guid":{"rendered":"https:\/\/cnkuangya.com\/?p=4807"},"modified":"2026-10-23T10:53:26","modified_gmt":"2026-10-23T02:53:26","slug":"1pn-vs-2p-rcbo","status":"publish","type":"post","link":"https:\/\/cnkuangya.com\/fr\/blog\/1pn-vs-2p-rcbo\/","title":{"rendered":"RCBO 1P+N vs 2P : Explication de la commutation du neutre et de la protection des p\u00f4les"},"content":{"rendered":"

1P+N vs 2P RCBO:<\/strong> both labels appear on residual-current circuit breakers with overcurrent protection, but they do not, by themselves, tell you whether the neutral is switched or whether both poles have overcurrent protection. The exact circuit diagram and datasheet decide those details. This guide explains what to check before specifying an RCBO for a single-phase distribution board.<\/p>\n\n

The short answer<\/h2>\n

A 1P+N RCBO has one phase pole and a neutral path. Its phase conductor receives overcurrent protection; the neutral can be switched or unswitched depending on the model. ABB, for example, lists both neutral-switched and neutral-unswitched variants within its 1P+N DSE201 family. A 2P RCBO has two poles, but its protection and switching functions still need to be confirmed from the particular manufacturer’s schematic. Schneider Electric lists a 2P iC60H2 variant with two protected poles. These product examples demonstrate why a pole-count label alone is insufficient for procurement.<\/p>\n\n

\"Comparison
Check neutral switching separately from the number of overcurrent-protected poles.<\/figcaption><\/figure>\n\n

Why neutral switching matters<\/h2>\n

\u201cNeutral switched\u201d means that the device opens the neutral path as part of its switching action. It does pas<\/em> mean the neutral has its own overcurrent trip element. This distinction affects isolation requirements, panel schedules, test procedures and the suitability of a device for a particular earthing arrangement. Some 1P+N units switch the neutral; others leave it solid. Therefore, never infer isolation performance from \u201c1P+N\u201d printed on a sales page.<\/p>\n

The RCBO’s residual-current function compares current in the conductors passing through its sensing arrangement. A mismatch can cause a trip. Overcurrent protection is a separate function, with its own rated current and breaking-capacity specifications. For the wider context, see our RCBO wiring diagram guide<\/a>.<\/p>\n\n

Comparison checklist for buyers<\/h2>\n
Question<\/th>1P+N RCBO<\/th>2P RCBO<\/th><\/tr><\/thead>
How many poles\/paths?<\/td>One phase pole plus neutral path<\/td>Two poles<\/td><\/tr>
Which poles have overcurrent protection?<\/td>Phase pole; verify the exact device<\/td>Check datasheet; some models protect both poles<\/td><\/tr>
Does neutral disconnect?<\/td>May be switched or unswitched<\/td>Verify wiring diagram and pole designation<\/td><\/tr>
Can the label alone confirm isolation?<\/td>Non<\/td>Non<\/td><\/tr>
Other ratings to verify<\/td>Voltage, current, residual-current sensitivity\/type, short-circuit capacity, certification and dimensions<\/td><\/tr><\/tbody><\/table><\/figure>\n\n

Kuangya model examples: VKL003\/VKL003N and VRL22<\/h2>\n

Published model specifications show why the pole label is only a starting point. The VKL003\/VKL003N product page<\/a> lists 1P+N versions rated 5\u201340 A, with VKL003 at AC 240 V and VKL003N at AC 120 V. The VRL22 product page<\/a> lists a 2P version rated 6\u201363 A at AC 240 V. Residual-current type and sensitivity options depend on the selected variant.<\/p>\n

These family-level specifications do not establish whether neutral is switched or whether both poles have overcurrent protection. Before specifying a unit, request the exact variant\u2019s terminal diagram, datasheet and applicable approval documents, then match them to the circuit and local requirements.<\/p>\n\n

How to choose the right RCBO<\/h2>\n
  1. Confirm the supply and circuit.<\/strong> Identify the line\/neutral arrangement, system voltage and relevant local wiring rules. Do not choose solely by physical width.<\/li>
  2. Request the internal circuit diagram.<\/strong> Ask whether neutral opens with the phase, which poles are overcurrent protected and where line and load terminals are located.<\/li>
  3. Match electrical ratings.<\/strong> Confirm rated current, trip curve, residual-current sensitivity (for example, 30 mA where required), residual-current type and rated short-circuit capacity for the installation.<\/li>
  4. Check coordination and certification.<\/strong> Check upstream protection, installation environment, applicable approval marks and the latest model-specific datasheet. IEC 61009-1 is the relevant product standard for RCBOs within its scope.<\/li>
  5. Review the actual product options.<\/strong> Compare our de disjoncteurs diff\u00e9rentiels avec protection contre les surintensit\u00e9s (RCBO)<\/a> et VKL003 1P+N RCBO<\/a>, then request the exact drawing for your selected variant.<\/li><\/ol>\n\n

    Common mistakes to avoid<\/h2>\n